Any use of this information falls under the rules of our
disclaimer.
材料文字说明
MagicFil Thermo PLA is based on EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29°C. MagicFil's anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29°C or above.
加工/物理特性 | 价值 | 单位 | Test Standard |
Other Standards[S] |
熔融指数, MFI |
6 |
g/10min |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
机械性能 | 价值 | 单位 | Test Standard |
Other Standards[S] |
弯曲模量 |
2392 |
MPa |
|
弯曲强度 |
55.2 |
MPa |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
热性能 | 价值 | 单位 | Test Standard |
ASTM数据 |
熔点 |
210 |
°C |
ASTM D 3418 |
光学特性 | 价值 | 单位 | Test Standard |
ASTM数据 |
光泽度 |
90[1] |
- |
ASTM D 2457 |
雾度 |
2.1 |
% |
ASTM D 1003 |
其它性能 | 价值 | 单位 | Test Standard |
密度 |
1240 |
kg/m³ |
ASTM D 792 |
机械性能(薄膜) | 价值 | 单位 | Test Standard |
ASTM Data |
拉伸模量, 平行 |
3310 |
MPa |
ASTM D 882 |
拉伸强度, 平行 |
110 |
MPa |
ASTM D 882 |
断裂伸长率, 平行 |
160 |
% |
ASTM D 882 |
典型数据
加工方法
Additive Manufacturing
供货形式
单纤纺丝
特殊性能
高冲击韧性的/经抗冲改性的
特征
好粘附性能
Certifications
生物相容
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com