Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MagicFil™ Thermo PLA - PLA - Formfutura BV

Material Data Center offers the following functions for MagicFil™ Thermo PLA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other MagicFil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Texto del producto
MagicFil Thermo PLA is based on EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29°C. MagicFil's anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29°C or above.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
Other Standards[S]
Índice de fluidez, MFI 6 g/10min
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades mecánicasValorUnidadesMétodo de ensayo
Other Standards[S]
Módulo de flexión 2392 MPa
Resistencia a la flexión 55.2 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Temperatura de fusión 210 °C ASTM D 3418
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Brillo 90[1] - ASTM D 2457
Opacidad 2.1 % ASTM D 1003
1: 20°
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1240 kg/m³ ASTM D 792
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción, long. 3310 MPa ASTM D 882
Esfuerzo de tracción, long. 110 MPa ASTM D 882
Alargamiento a la rotura, long. 160 % ASTM D 882
Características
Procesamiento y forma de entrega
Additive Manufacturing
Forma de suministro
Monofilamento
Características especiales
Alto impacto o modificado al impacto
Características
Buenas propiedades de adhesión
Certifications
Contiene recursos renovables
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.