Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MagicFil™ Thermo PLA - PLA - Formfutura BV

Material Data Center offers the following functions for MagicFil™ Thermo PLA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other MagicFil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
제품 설명서
MagicFil Thermo PLA is based on EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29°C. MagicFil's anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29°C or above.
Processing/Physical Characteristics값단위시험규격
Other Standards[S]
용융 흐름성, MFI 6 g/10min
S: These properties are reported by the producer according standards that are different to our defaults.
기계적 특성값단위시험규격
Other Standards[S]
굴곡 계수 2392 MPa
굴곡 강도 55.2 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
ASTM 데이터
녹는점 210 °C ASTM D 3418
광학 특성값단위시험규격
ASTM 데이터
광택도 90[1] - ASTM D 2457
탁도 2.1 % ASTM D 1003
1: 20°
기타 특성값단위시험규격
밀도 1240 kg/m³ ASTM D 792
기계적 성질 (필름) 값단위시험규격
ASTM Data
인장탄성률, 평행 3310 MPa ASTM D 882
인장 강도, 평행 110 MPa ASTM D 882
파단시 신율 , 평행 160 % ASTM D 882
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament
특별 특성
고충격 또는 고충격 보강
특성
Good Adhesion
Certifications
Contains renewable resources
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.