Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® 4332L6 - PPS-(MD+GF) - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Fortron 4332L6 is a glass fiber/mineral filled injection molding grade, which is intended for applications requiring improved tensile and flexural properties, when compared to other GF/MIN reinforced PPS grades. The recommended processing parameters are similar to the standard grades.

Flammability @1.6mm nom. thickn.

V-0

-

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
成形収縮率, 平行	0.4	%	ISO 294-4, 2577
成形収縮率, 直角	0.5	%	ISO 294-4, 2577

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	22500	MPa	ISO 527
破壊応力	160	MPa	ISO 527
破壊ひずみ	1.2	%	ISO 527
シャルピー衝撃強さ, +23°C	30	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	6.1	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	6.5	kJ/m²	ISO 179/1eA

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	280	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	90	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	270	°C	ISO 75-1/-2
荷重たわみ温度, 8.00 MPa	220	°C	ISO 75-1/-2
線膨張係数, 平行	12	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	45	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	V-0	class	IEC 60695-11-10

その他の特性.	値	単位	テスト基準
吸水率	0.02	%	Sim. to ISO 62
密度	1950	kg/m³	ISO 1183

機能

特殊な特性

領域別の利用可能性

北アメリカ., ヨーロッパ., 南・中央アメリカ., 近東/アフリカ

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.