Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® 4332L6 - PPS-(MD+GF) - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Fortron 4332L6 is a glass fiber/mineral filled injection molding grade, which is intended for applications requiring improved tensile and flexural properties, when compared to other GF/MIN reinforced PPS grades. The recommended processing parameters are similar to the standard grades.

Flammability @1.6mm nom. thickn.

V-0

-

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Retrait au moulage, parallèle	0.4	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	0.5	%	ISO 294-4, 2577

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	22500	MPa	ISO 527
Contrainte à la rupture	160	MPa	ISO 527
Déformation à la rupture	1.2	%	ISO 527
Résistance au choc Charpy, +23°C	30	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	6.1	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	6.5	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	280	°C	ISO 11357-1/-3
Température de transition vitreuse, 10°C/min	90	°C	ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa	270	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 8.00 MPa	220	°C	ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle	12	E-6/K	ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend.	45	E-6/K	ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm	V-0	class	IEC 60695-11-10

Propriétés diverses	Valeur	Unité	Norme du test
Absorption d'eau	0.02	%	Sim. to ISO 62
Masse volumique	1950	kg/m³	ISO 1183

Fonctions

Caractéristiques

Disponibilité régionale

Amérique du nord, Europe, South and Central America, Proche-Orient/Afrique

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.