Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® 4332L6 - PPS-(MD+GF) - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Funciones

Any use of this information falls under the rules of our disclaimer.

Texto del producto

Fortron 4332L6 is a glass fiber/mineral filled injection molding grade, which is intended for applications requiring improved tensile and flexural properties, when compared to other GF/MIN reinforced PPS grades. The recommended processing parameters are similar to the standard grades.

Flammability @1.6mm nom. thickn.

V-0

-

Caracteristicas de procesamiento y fisicas	Valor	Unidades	Método de ensayo
ISO Data
Contracción posterior al moldeo, paralelo	0.4	%	ISO 294-4, 2577
Contracción posterior al moldeo, normal	0.5	%	ISO 294-4, 2577

Propiedades mecánicas	Valor	Unidades	Método de ensayo
ISO Data
Módulo de tracción	22500	MPa	ISO 527
Resistencia a la tracción	160	MPa	ISO 527
Alargamiento a rotura	1.2	%	ISO 527
Resistencia al impacto Charpy, +23°C	30	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy, -30°C	6.1	kJ/m²	ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C	6.5	kJ/m²	ISO 179/1eA

Propiedades térmicas	Valor	Unidades	Método de ensayo
ISO Data
Temperatura de fusión, 10°C/min	280	°C	ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min	90	°C	ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa	270	°C	ISO 75-1/-2
Estabilidad al calor, 8.00 MPa	220	°C	ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo	12	E-6/K	ISO 11359-1/-2
Coef.de expansión térmica lineal, normal	45	E-6/K	ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom.	V-0	class	IEC 60695-11-10

Otras propiedades	Valor	Unidades	Método de ensayo
Absorción de agua	0.02	%	Sim. to ISO 62
Densidad	1950	kg/m³	ISO 1183

Funciones

Características

Disponibilidad regional

Norteamérica, Europa, América del Sur y Centroaméric, Próximo Oriente/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.