Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of FIL-A-GEHR PEEK® - PEEK - Gehr GmbH
Material Data Center offers the following functions for FIL-A-GEHR PEEK®:
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Fil-A-Gehr datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
加工/物理特性 | 价值 | 单位 | Test Standard |
ISO数据 |
熔体体积流动速度, MVR |
4.75[1] |
cm³/10min |
ISO 1133 |
温度 |
380 |
°C |
- |
载荷 |
5 |
kg |
- |
1: | Data based an semi-finished product |
机械性能 | 价值 | 单位 | Test Standard |
ASTM数据 |
拉伸模量 |
3500[2] |
MPa |
ASTM D 638 |
屈服应力 |
94.5[2] |
MPa |
ASTM D 638 |
2: | Data based on raw material |
热性能 | 价值 | 单位 | Test Standard |
ASTM数据 |
DTUL @ 264 psi |
157[3] |
°C |
ASTM D 648 |
3: | Data based on raw material |
其它性能 | 价值 | 单位 | Test Standard |
密度 |
1290[4] |
kg/m³ |
ASTM D 792 |
4: | Data based on raw material |
典型数据
加工方法
Additive Manufacturing
供货形式
单纤纺丝, 自然色
特征
好粘附性能, 少气味
耐化学试剂
通用耐化学性
应用
航天航空
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.