Any use of this information falls under the rules of our
disclaimer.
Características de processamento/físicas | Valor | Unidade | Método de ensaio |
ISO Dados |
Índice de fluidez volumétrico, MVR |
4.75[1] |
cm³/10min |
ISO 1133 |
Temperatura |
380 |
°C |
- |
Carga |
5 |
kg |
- |
1: | Data based an semi-finished product |
Propriedades mecânicas | Valor | Unidade | Método de ensaio |
ASTM Dados |
Módulo de tração |
3500[2] |
MPa |
ASTM D 638 |
Resistência à tração no escoamento |
94.5[2] |
MPa |
ASTM D 638 |
2: | Data based on raw material |
Propriedades térmicas | Valor | Unidade | Método de ensaio |
ASTM Dados |
DTUL @ 264 psi |
157[3] |
°C |
ASTM D 648 |
3: | Data based on raw material |
Outras propriedades | Valor | Unidade | Método de ensaio |
Densidade |
1290[4] |
kg/m³ |
ASTM D 792 |
4: | Data based on raw material |
Características
Processamento
Additive Manufacturing
Forma de entrega
Monofilament, Cor natural
Características
Boa adesão, Baixo odor
Resistência Química
Resistência química geral
Aplicaciones
Avião e aeroespacial
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com