Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraForm® PA Plastic - PA12 - 3D Systems Corporation

Material Data Center offers the following functions for DuraForm® PA Plastic:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Duraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ASTM数据
拉伸模量 1586 MPa ASTM D 638
拉伸强度 43 MPa ASTM D 638
断裂伸长率 14 % ASTM D 638
弯曲模量 1386 MPa ASTM D 790
弯曲强度 48 MPa ASTM D 790
邵氏硬度D 73 - ASTM D 2240
Gardner冲击强度 2.71 J ASTM D 2794,4226,5420
悬臂梁缺口冲击强度, 1/8 in 32 J/m ASTM D 256
Izod冲击强度, 1/8 in 336 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 HB - UL 94
DTUL @ 66 psi 180 °C ASTM D 648
DTUL @ 264 psi 95 °C ASTM D 648
Other Standards[S]
热释放速率, 平行 82.8 E-6/K ASTM E 831
比热 1040 J/(kg K) ASTM E 1269
S: These properties are reported by the producer according standards that are different to our defaults.
电性能价值单位Test Standard
ASTM数据
电介质强度, 短时 17.3 kV/mm ASTM D 149
表面电阻率 7E12 Ohm ASTM D 257
体积电阻率 5.9E13 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
吸水率, 24小时 0.07 % ASTM D 570
密度 1000 kg/m³ ASTM D 792
典型数据
加工方法
Additive Manufacturing
供货形式
粉料, 白色
特殊性能
消毒, 蒸汽灭菌
耐化学试剂
通用耐化学性
Certifications
医用级, US药物六级认证
应用
航天航空, 电子电气, 药物
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.