Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE F04660 - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE F04660:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades do filme
Any use of this information falls under the rules of our disclaimer.
Informação do produto
SABIC® HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 0.7 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1250 MPa ISO 527
Tensão no escoamento 29 MPa ISO 527
Tensão na ruptura 18 MPa ISO 527
Deformação na ruptura >50 % ISO 527
Módulo de flexão, 23°C 1550 MPa ISO 178
Resistência à flexão 31 MPa ISO 178
Impacto Izod com entalhe 6 kJ/m² ISO 180/1A
Dureza Shore D 63 - ISO 7619-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 134 °C ISO 11357-1/-3
Temperatura de deflexão térmica , 0.45 MPa 88 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 129 °C ISO 306
ASTM Dados
Temperatura de amolecimento Vicat 129 °C ASTM D 1525
Propriedades do filmeValorUnidadeMétodo de ensaio
ASTM Data
Módulo de tração, long. 1250 MPa ASTM D 882
Módulo de tração, trans. 1700 MPa ASTM D 882
Resistência à tração na ruptura, long. 67 MPa ASTM D 882
Resistência à tração na ruptura, trans. 37 MPa ASTM D 882
Deformação na ruptura, long. 490 % ASTM D 882
Deformação na ruptura, trans. 3 % ASTM D 882
Características
Características
Homopolímero
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.