Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE F04660 - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE F04660:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Meccaniche (Film)
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
SABIC® HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 0.7 g/10min ASTM D 1238
Temperatura 190 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1250 MPa ISO 527
Carico unitario a trazione 29 MPa ISO 527
Carico unitario a rottura 18 MPa ISO 527
Deformazione a rottura >50 % ISO 527
Modulo a flessione, 23°C 1550 MPa ISO 178
Resistenza alla flessione 31 MPa ISO 178
Resistenza all'urto Izod con intaglio 6 kJ/m² ISO 180/1A
Durezza Shore D 63 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 134 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 0.45 MPa 88 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 129 °C ISO 306
ASTM Data
Temp.di rammollimento Vicat 129 °C ASTM D 1525
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ASTM Data
Modulo a trazione, lung. 1250 MPa ASTM D 882
Modulo a trazione, tras. 1700 MPa ASTM D 882
Resistenza alla trazione a rottura, lung. 67 MPa ASTM D 882
Resistenza alla trazione a rottura, tras. 37 MPa ASTM D 882
Allungamento a rottura, lung. 490 % ASTM D 882
Allungamento a rottura, tras. 3 % ASTM D 882
Caratteristiche
Caratteristiche
Omopolimero
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.