Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE F04660 - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE F04660:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés mécaniques (Grades film)
Any use of this information falls under the rules of our disclaimer.
Informations produit
SABIC® HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 0.7 g/10min ASTM D 1238
Température 190 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1250 MPa ISO 527
Contrainte d'écoulement 29 MPa ISO 527
Contrainte à la rupture 18 MPa ISO 527
Déformation à la rupture >50 % ISO 527
Module de flexion, 23°C 1550 MPa ISO 178
Résistance à la flexion 31 MPa ISO 178
Résistance au choc Izod avec entaille 6 kJ/m² ISO 180/1A
Dureté Shore D 63 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 134 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 0.45 MPa 88 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 129 °C ISO 306
ASTM Data
Vicat température 129 °C ASTM D 1525
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ASTM Data
Module en traction, long. 1250 MPa ASTM D 882
Module en traction, trav. 1700 MPa ASTM D 882
Résistance de traction à la rupture, long. 67 MPa ASTM D 882
Résistance de traction à la rupture, trav. 37 MPa ASTM D 882
Allongement à la rupture, long. 490 % ASTM D 882
Allongement à la rupture, trav. 3 % ASTM D 882
Caractéristiques
Caractéristiques
Homopolymère
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.