Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound 19T1040 - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound 19T1040:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
SABIC® PPcompound 19T1040 is a 40% talc-filled polypropylene homopolymer. The material's high fill grade makes for a very high stiffness. This combined with the high flow and good thermal stabilization makes it especially suited for complex injection molded applications requiring a very high modulus and high thermal stability. SABIC® PPcompound 19T1040 is a designated automotive grade. IMDS ID: 16488039
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 18 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 3600 MPa ISO 527
Tensão no escoamento 30 MPa ISO 527
Deformação no escoamento 2.3 % ISO 527
Tensão na ruptura 24 MPa ISO 527
Deformação na ruptura 11 % ISO 527
Módulo de flexão, 23°C 3600 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 3 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 1 kJ/m² ISO 179/1eA
Impacto Izod com entalhe 1.5 kJ/m² ISO 180/1A
ASTM Dados
Módulo de tração 3990 MPa ASTM D 638
Resistência à tração no escoamento 32 MPa ASTM D 638
Resistência à tração na ruptura 28 MPa ASTM D 638
Alongamento no escoamento 3 % ASTM D 638
Deformação na ruptura 6.7 % ASTM D 638
Módulo de flexão 3600 MPa ASTM D 790
Dureza Shore D 75 - ASTM D 2240
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 89 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 130 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 150 °C ISO 306
ASTM Dados
DTUL @ 66 psi 134 °C ASTM D 648
DTUL @ 264 psi 78 °C ASTM D 648
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1250 kg/m³ ISO 1183
Densidade 1260 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 80 - 100 °C -
Pré-secagem - tempo 2 - 4 h -
Temperatura da massa 210 - 270 °C -
Temperatura do molde 15 - 60 °C -
Zona 1 190 - 230 °C -
Zona 2 200 - 250 °C -
Zona 3 210 - 270 °C -
Temperatura do bico 210 - 270 °C -
Contrapressão 1 - 1.5 MPa -
Características
Processamento
Moldagem por injeção
Características
Homopolímero
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.