Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
Other Standards[S] |
성형 수축률, 평행 |
0.0049 |
mm/mm |
JIS K 6911 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기계적 특성 | 값 | 단위 | 시험규격 |
Other Standards[S] |
챠피 노치드 충격 강도, +23°C |
3.1 |
kJ/m² |
JIS K 6911 |
굴곡 계수 |
9500 |
MPa |
JIS K 6911 |
굴곡 강도 |
102 |
MPa |
JIS K 6911 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
열적 특성 | 값 | 단위 | 시험규격 |
ASTM 데이터 |
UL94 난연성 |
V-0 |
- |
UL 94 |
테스트 두께 |
0.43 |
mm |
- |
Other Standards[S] |
DTUL @ 264 psi |
225 |
°C |
JIS K 6911 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
전기적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
CTI |
175 |
- |
IEC 60112 |
Other Standards[S] |
전기 압력, step/step |
10 |
kV/mm |
JIS K 6911 |
아크 저항 |
180 |
s |
JIS K 6911 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기타 특성 | 값 | 단위 | 시험규격 |
Other Standards[S] |
밀도 |
1670 |
kg/m³ |
JIS K 6911 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
특징
생산 공정
사출 성형, 트랜스퍼 성형
인도 유형
검정
특별 특성
열안정성
Certifications
Contains renewable resources
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com