Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin GFN3 - Americas - (PPE+PS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin GFN3 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL™ GFN3 resin is a 30% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN3 carries a UL746C outdoor suitability rating of F2 and is an excellent candidate for a variety of indoor and outdoor applications including construction, electrical components + displays, lawn and garden equipment. *See NORYL GFN3F resin for FDA food compliant / NSF version.

UL Yellow Card Link E121562-221162
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 7 cm³/10min ISO 1133
温度 300 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 8.6 g/10min ASTM D 1238
温度 300 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 8740 MPa ISO 527
破壊応力 117 MPa ISO 527
破壊ひずみ 1.8 % ISO 527
曲げ弾性率 8710 MPa ISO 178
曲げ強さ 183 MPa ISO 178
シャルピー衝撃強さ, +23°C 39 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 47 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 31 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 35 kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 12 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 11 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 9150 MPa ASTM D 638
破壊応力 116 MPa ASTM D 638
破断伸び 2 % ASTM D 638
曲げ弾性率 8000 MPa ASTM D 790
ロックウェル硬度 L108 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 117 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 124 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 588 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 137 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 143 °C ISO 75-1/-2
ビカット軟化温度, B 143 °C ISO 306
ビカット軟化温度, 120°C/h 50N 147 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
DTUL @ 66 psi 142 °C ASTM D 648
DTUL @ 264 psi 137 °C ASTM D 648
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 21.6 kV/mm ASTM D 149
誘電正接, 60 Hz 0.0009 - ASTM D 150
比誘電率, 60 Hz 2.93 - ASTM D 150
その他の特性.値単位テスト基準
密度 1290 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 110 - 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 300 - 325 °C -
金型温度 80 - 110 °C -
Zone 1 265 - 315 °C -
Zone 2 275 - 320 °C -
Zone 3 290 - 325 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
耐薬品性
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
アプリケーション
自動車
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.