Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin GFN3 - Americas - (PPE+PS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin GFN3 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL™ GFN3 resin is a 30% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN3 carries a UL746C outdoor suitability rating of F2 and is an excellent candidate for a variety of indoor and outdoor applications including construction, electrical components + displays, lawn and garden equipment. *See NORYL GFN3F resin for FDA food compliant / NSF version.

UL Yellow Card Link E121562-221162
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 7 cm³/10min ISO 1133
Temperature 300 °C -
Load 5 kg -
ASTM Data
Melt Flow Index, MFI 8.6 g/10min ASTM D 1238
Temperature 300 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 8740 MPa ISO 527
Stress at break 117 MPa ISO 527
Strain at break 1.8 % ISO 527
Flexural modulus 8710 MPa ISO 178
Flexural strength 183 MPa ISO 178
Charpy impact strength, +23°C 39 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 47 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 31 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 35 kJ/m² ISO 180/1U
Izod notched impact strength, +23°C, 4mm 12 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 11 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 9150 MPa ASTM D 638
Tensile Strength at Break 116 MPa ASTM D 638
Elongation at Break 2 % ASTM D 638
Flexural Modulus 8000 MPa ASTM D 790
Rockwell Hardness L108 - ASTM D 785
Izod Impact notched, 1/8 in 117 J/m ASTM D 256
Izod Impact notched, Low-Temperature 124 J/m ASTM D 256
Temperature -30 °C -
Izod Impact unnotched, 1/8 in 588 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 137 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 143 °C ISO 75-1/-2
Vicat softening temperature, B 143 °C ISO 306
Vicat softening temperature, 120°C/h 50N 147 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm -
ASTM Data
DTUL @ 66 psi 142 °C ASTM D 648
DTUL @ 264 psi 137 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 21.6 kV/mm ASTM D 149
Dissipation Factor, 60 Hz 0.0009 - ASTM D 150
Dielectric Constant, 60 Hz 2.93 - ASTM D 150
Other propertiesValueUnitTest Standard
Density 1290 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 110 - 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
Melt temperature 300 - 325 °C -
Mold temperature 80 - 110 °C -
Zone 1 265 - 315 °C -
Zone 2 275 - 320 °C -
Zone 3 290 - 325 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Chemical Resistance
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
Applications
Automotive
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.