Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GW1458HF - PA9T-GF45 - Kuraray Co., Ltd.

Material Data Center offers the following functions for Genestar™ GW1458HF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Genestar GW1458HF is a 45%GF grade developed for E&E applications. 


The main features of GW1458HF are:
　-Low warpage
　-Good flow-ability

GW1458HF is suitable for warpage-sensitive card connectors.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.2 % ISO 294-4, 2577
成形収縮率, 直角 0.7 % ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI 90 g/10min ASTM D 1238
温度 320 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張強度 157 MPa ISO 527
破壊応力 157 MPa ISO 527
破壊ひずみ 1.5 % ISO 527
曲げ弾性率, 23°C 12800 MPa ISO 178
曲げ強さ 242 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 16 kJ/m² ISO 179/1eA
ASTM数据
引張強度 150 MPa ASTM D 638
曲げ弾性率 13000 MPa ASTM D 790
曲げ強さ 207 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 130 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 306 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 125 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 290 °C ISO 75-1/-2
ASTM数据
UL94 燃焼性 HB - UL 94
DTUL @ 264 psi 290 °C ASTM D 648
溶融温度 306 °C ASTM D 3418
ガラス転移温度 125 °C ASTM E 1356
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 30 kV/mm ASTM D 149
体積抵抗率 >1E15 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸水率 0.12 % Sim. to ISO 62
密度 1500 kg/m³ ISO 1183
密度 1500 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
特殊な特性.
熱安定化.
な特性
Low Warpage, Weldable
アプリケーション
電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.