Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® 100ST NC010 - POM - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance.  It is designed for highly stressed parts where outstanding toughness is essential.

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	1.7	cm³/10min	ISO 1133
温度	190	°C	-
荷重	2.16	kg	-
成形収縮率, 平行	0.8	%	ISO 294-4, 2577
成形収縮率, 直角	1.1	%	ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI	0.8	g/10min	ASTM D 1238
温度	190	°C	-
荷重	2.16	kg	-
成形収縮率., 平行	0.0105	mm/mm	ASTM D 955
成形収縮率, 直角	0.0115	mm/mm	ASTM D 955

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	1400	MPa	ISO 527
降伏応力	41	MPa	ISO 527
降伏ひずみ	30	%	ISO 527
破壊呼びひずみ	>50	%	ISO 527
引張クリープ弾性率, 1h	1100	MPa	ISO 899-1
引張クリープ弾性率, 1000h	550	MPa	ISO 899-1
シャルピー衝撃強さ, +23°C	N	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	N	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	90	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	18	kJ/m²	ISO 179/1eA
ショア硬さD	70	-	ISO 7619-1
ASTM数据
引張弾性率	1300	MPa	ASTM D 638
引張強度	32	MPa	ASTM D 638
降伏応力	45	MPa	ASTM D 638
降伏点伸び	35	%	ASTM D 638
破断伸び	150	%	ASTM D 638
曲げ弾性率	1130	MPa	ASTM D 790
ロックウェル硬度	R 105	-	ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in	N	J/m	ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature	250	J/m	ASTM D 256
温度	-40	°C	-

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	178	°C	ISO 11357-1/-3
ガラス転移点, 10°C/min	-35	°C	ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa	60	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	100	°C	ISO 75-1/-2
線膨張係数, 平行	130	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	140	E-6/K	ISO 11359-1/-2
1.5mm厚さでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	1.5	mm	-
Yellow Card 可用	はい	-	-
ASTM数据
UL94 燃焼性	HB	-	UL 94
追加試験片の厚さ	1.5	mm	-
線膨張係数, 平行	126	E-6/K	ASTM D 696
線膨張係数, 直角	136	E-6/K	ASTM D 696
DTUL @ 66 psi	124	°C	ASTM D 648
DTUL @ 264 psi	61	°C	ASTM D 648
溶融温度	178	°C	ASTM D 3418

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 100Hz	4.4	-	IEC 62631-2-1
比誘電率, 1MHz	3.8	-	IEC 62631-2-1
体積抵抗率	1E12	Ohm*m	IEC 62631-3-1
表面抵抗率	1E14	Ohm	IEC 62631-3-2
耐トラッキング性	600	-	IEC 60112
ASTM数据
耐電圧, 短い時間	20	kV/mm	ASTM D 149
誘電正接, 1 MHz	0.027	-	ASTM D 150
比誘電率, 1 MHz	4.2	-	ASTM D 150
表面抵抗率	2E14	Ohm	ASTM D 257
体積抵抗率	4E14	Ohm*cm	ASTM D 257

その他の特性.	値	単位	テスト基準
吸水率	0.9	%	Sim. to ISO 62
吸湿率	0.35	%	Sim. to ISO 62
密度	1340	kg/m³	ISO 1183
吸水率, 24hr	0.44	%	ASTM D 570
吸水率, 平衡	0.35	%	ASTM D 570
密度	1340	kg/m³	ASTM D 792

機能

特殊な特性

成形加工法.

射出成形., Pipe/Tube Extrusion, 異形押出成形., シート押出成形., Wire/Cable Extrusion, その他の押出成形., コーティング., ブロー成形.

納入形状.

ペレット., ナチュラルカラー

添加剤.

滑剤., 離型剤.

特殊な特性.

高耐衝撃及び耐衝撃改良.

な特性

Weldable, Homopolymer

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.