Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 3310TD - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 3310TD:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
ULTEM 3310TD resin is an amorphous, filled, near infra-red transparent polyetherimide (PEI) thermoplastic, offering a material with an unique combination of low CTE and high near infra-red transparency.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 6.84 cm³/10min ISO 1133
Temperatura 337 °C -
Carico 6.7 kg -
ASTM Data
Indice di fluidità a caldo, MFI 10.3 g/10min ASTM D 1238
Temperatura 337 °C -
Carico 6.7 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 4900 MPa ISO 527
Carico unitario a rottura 67 MPa ISO 527
Deformazione a rottura 1.6 % ISO 527
Modulo a flessione, 23°C 4900 MPa ISO 178
Resistenza all'urto Charpy, +23°C 21.1 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 4.1 kJ/m² ISO 179/1eA
Resistenza all'urto Izod, +23°C 36.5 kJ/m² ISO 180/1U
Resistenza all'urto Izod con intaglio, +23°C 4.7 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 5000 MPa ASTM D 638
Resistenza alla trazione a rottura 62 MPa ASTM D 638
Allungamento a rottura 1.5 % ASTM D 638
Modulo a flessione 5000 MPa ASTM D 790
Resistenza alla flessione 109 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 47 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in 580 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 197 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 208 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 211 °C ISO 306
ASTM Data
coefficiente d’espansione termica, lung. 39 E-6/K ASTM D 696
Coefficiente d’espansione termica, tras. 40 E-6/K ASTM D 696
DTUL a 66 psi 206 °C ASTM D 648
DTUL a 264 psi 196 °C ASTM D 648
Temp.di rammollimento Vicat 211 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'umidità 0.077 % Sim. alla ISO 62
Massa volumica 1540 kg/m³ ISO 1183
Densità 1550 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 135 - 150 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 360 - 390 °C -
Temperatura dello stampo 150 - 190 °C -
Zona 1 350 - 370 °C -
Zona 2 350 - 370 °C -
Zona 3 350 - 380 °C -
Temperatura dell ugello 350 - 380 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Stabilizzato o stabile al calore, Trasparente
Caratteristiche
Amorfo
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.