Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 3310TD - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 3310TD:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
ULTEM 3310TD resin is an amorphous, filled, near infra-red transparent polyetherimide (PEI) thermoplastic, offering a material with an unique combination of low CTE and high near infra-red transparency.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 6.84 cm³/10min ISO 1133
Temperatura 337 °C -
Carga 6.7 kg -
ASTM Data
Índice de fluidez, MFI 10.3 g/10min ASTM D 1238
Temperatura 337 °C -
Carga 6.7 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 4900 MPa ISO 527
Resistencia a la tracción 67 MPa ISO 527
Alargamiento a rotura 1.6 % ISO 527
Módulo de flexión, 23°C 4900 MPa ISO 178
Resistencia al impacto Charpy, +23°C 21.1 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 4.1 kJ/m² ISO 179/1eA
Resistencia al impacto Izod, +23°C 36.5 kJ/m² ISO 180/1U
Resistencia al impacto Izod con entalla, +23°C 4.7 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 5000 MPa ASTM D 638
Esfuerzo de fractura a tracción 62 MPa ASTM D 638
Alargamiento a la rotura 1.5 % ASTM D 638
Módulo de flexión 5000 MPa ASTM D 790
Resistencia a la flexión 109 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 47 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in 580 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 197 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 208 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 211 °C ISO 306
ASTM Data
Coeficiente de dilatación térmica, long. 39 E-6/K ASTM D 696
Coeficiente de dilatación térmica, normal 40 E-6/K ASTM D 696
Estabilidad al calor @ 66 psi 206 °C ASTM D 648
Estabilidad al calor @ 264 psi 196 °C ASTM D 648
Temperatura Vicat 211 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de humedad 0.077 % Sim. to ISO 62
Densidad 1540 kg/m³ ISO 1183
Densidad 1550 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 135 - 150 °C -
Tiempo de pre-secado 4 - 6 h -
Humedad de procesamiento ≤0.02 % -
Temperatura de la masa 360 - 390 °C -
Temperatura del molde 150 - 190 °C -
Zona 1 350 - 370 °C -
Zona 2 350 - 370 °C -
Zona 3 350 - 380 °C -
Temperatura de boquilla 350 - 380 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Estable contra el calor, Transparente
Características
Amorfo
Applicaciones
Electrica
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.