Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RAVAMID® R200 GF15 F - PA6-GF15 - Ravago Group

Material Data Center offers the following functions for RAVAMID® R200 GF15 F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ravamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 25 g/10min ISO 1133
Temperatura 250 °C -
Carico 2.16 kg -
ASTM Data
Ritiro di stampaggio, parallelo 0.0075 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a rottura 80 MPa ISO 527
Deformazione a rottura 5 % ISO 527
Modulo a flessione, 23°C 4100 MPa ISO 178
Resistenza alla flessione 80 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 5.5 kJ/m² ISO 180/1A
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 230 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 150[ann.] °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 200 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.6 mm -
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 3.2 mm -
Glow Wire Flammability Index (GWFI) 650 °C IEC 60695-2-12
GWFI - thickness tested (1) 2 mm -
ann.: annealed
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1220 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 1.1 % ASTM D 570
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 75 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.12 % -
Temperatura di fusione 240 - 270 °C -
Temperatura dello stampo 70 - 90 °C -
Zona 1 220 - 230 °C -
Zona 2 230 - 245 °C -
Zona 3 250 - 260 °C -
Temperatura dell ugello 250 - 260 °C -
Velocità di Rotazione della Vite 50 - 80 rpm -
Contropressione 0.4 - 0.8 MPa -
Pressione di chiusura 6 - 8 MPa -
Caratteristiche
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.