Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Reny 2502A - PAMXD6-(GF+MX)20 - Mitsubishi Engineering-Plastics Corporation

Material Data Center offers the following functions for Reny 2502A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Reny datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 14 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carga 2.16 / * kg -
Índice de fluidez, MFI 21.6 g/10min ISO 1133
Temperatura 275 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 0.5 / * % ISO 294-4, 2577
Propiedades mecánicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 18400 / 14900 MPa ISO 527
Resistencia a la tracción 150 / 120 MPa ISO 527
Alargamiento a rotura 1.2 / 1.3 % ISO 527
Módulo de flexión, 23°C 16500 / 14700 MPa ISO 178
Resistencia al impacto Charpy, +23°C 27 / 29 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 4.1 / 4.3 kJ/m² ISO 179/1eA
Propiedades térmicasSeco / CondUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 217 / * °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 235 / * °C ISO 75-1/-2
Coef.de expansión térmica lineal, paralelo 20 / * E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 30 / * E-6/K ISO 11359-1/-2
Combustibilidad a 1.5mm esp. nom. V-0 / * class IEC 60695-11-10
Espesores de probeta 1.6 / * mm -
Yellow Card disponible sí / * - -
Propiedades eléctricasSeco / CondUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 100Hz - / 5 - IEC 62631-2-1
Constante dieléctrica, 1MHz - / 5 - IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz - / 500 E-4 IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz - / 170 E-4 IEC 62631-2-1
Resistividad volumétrica específica 2E14 / 1E13 Ohm*m IEC 62631-3-1
Resistividad superficial específica * / 2E14 Ohm IEC 62631-3-2
Resistencia dieléctrica 27 / 26 kV/mm IEC 60243-1
Indice comparativo de linea de fuga 200 / 300 - IEC 60112
Otras propiedadesSeco / CondUnidadesMétodo de ensayo
Absorción de humedad 0.9 / * % Sim. to ISO 62
Densidad 1660 / - kg/m³ ISO 1183
Características
Características especiales
Resistencia mejorada al fuego
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.