Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELANEX® 1600A - PBT - Celanese

Material Data Center offers the following functions for CELANEX® 1600A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Celanex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Texto del producto
Celanex 1600A is a high molecular weight grade of unreinforced polybutylene terephthalate for use in both extrusion and injection molding applications.

Flammability at thickness h (0.75 mm)HB-
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 9 cm³/10min ISO 1133
Temperatura 250 °C -
Carga 2.16 kg -
Contracción posterior al moldeo, paralelo 1.9 % ISO 294-4, 2577
Contracción posterior al moldeo, normal 1.9 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2550 MPa ISO 527
Esfuerzo de fluencia 60 MPa ISO 527
Alarg. en límite elástico 5 % ISO 527
Alarg. nominal a rotura >50 % ISO 527
Resistencia al impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistencia al impacto Charpy, -30°C 210 kJ/m² ISO 179/1eU
Resistencia al impacto Charpy c/entalla, +23°C 7 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 6.5 kJ/m² ISO 179/1eA
Dureza Shore D 77 - ISO 7619-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 225 °C ISO 11357-1/-3
Temp. de transición vítrea, 10°C/min 60 °C ISO 11357-1/-2
Estabilidad al calor, 1.80 MPa 50 °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 150 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 185 °C ISO 306
Coef.de expansión térmica lineal, paralelo 110 E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 103 E-6/K ISO 11359-1/-2
Combustibilidad a espesor h HB class IEC 60695-11-10
Espesores de probeta 0.8 mm -
Combustibilidad según índice de oxigeno 22 % ISO 4589-1/-2
Propiedades eléctricasValorUnidadesMétodo de ensayo
ISO Data
Constante dieléctrica, 100Hz 4 - IEC 62631-2-1
Constante dieléctrica, 1MHz 3.5 - IEC 62631-2-1
Factor de pérdidas dieléctricas, 100Hz 14 E-4 IEC 62631-2-1
Factor de pérdidas dieléctricas, 1MHz 210 E-4 IEC 62631-2-1
Resistividad volumétrica específica >1E13 Ohm*m IEC 62631-3-1
Resistividad superficial específica >1E15 Ohm IEC 62631-3-2
Resistencia dieléctrica 23 kV/mm IEC 60243-1
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.45 % Sim. to ISO 62
Absorción de humedad 0.2 % Sim. to ISO 62
Densidad 1310 kg/m³ ISO 1183
Funciones
Módulo de cizallamiento dinámico-temperatura , CELANEX® 1600A, PBT, Celanese
Esfuerzo-alargamiento , CELANEX® 1600A, PBT, Celanese
Módulo secante-alargamiento , CELANEX® 1600A, PBT, Celanese
Características
Procesamiento y forma de entrega
Moldeo por inyección, Extrusion del film, Extrusión de perfiles, Extrusión de láminas, Otros tipos de extrusión
Forma de suministro
Sémola
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Demás información
Moldeo por inyección
Injection speed, injection pressure and holding pressure have to be optimized to the individual article geometry. To avoid material degradation during processing low back pressure and minimum screw speed have to be used. Overheating of the material has to be avoided. Up to 25% clean and dry regrind may be used.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.