Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 3310TD - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 3310TD:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
ULTEM 3310TD resin is an amorphous, filled, near infra-red transparent polyetherimide (PEI) thermoplastic, offering a material with an unique combination of low CTE and high near infra-red transparency.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 6.84 cm³/10min ISO 1133
Temperature 337 °C -
Load 6.7 kg -
ASTM Data
Melt Flow Index, MFI 10.3 g/10min ASTM D 1238
Temperature 337 °C -
Load 6.7 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 4900 MPa ISO 527
Stress at break 67 MPa ISO 527
Strain at break 1.6 % ISO 527
Flexural modulus, 23°C 4900 MPa ISO 178
Charpy impact strength, +23°C 21.1 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 4.1 kJ/m² ISO 179/1eA
Izod impact strength, +23°C 36.5 kJ/m² ISO 180/1U
Izod notched impact strength, +23°C 4.7 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 5000 MPa ASTM D 638
Tensile Strength at Break 62 MPa ASTM D 638
Elongation at Break 1.5 % ASTM D 638
Flexural Modulus 5000 MPa ASTM D 790
Flexural Strength 109 MPa ASTM D 790
Izod Impact notched, 1/8 in 47 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 580 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 197 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 208 °C ISO 75-1/-2
Vicat softening temperature, B 211 °C ISO 306
ASTM Data
Coefficient of Thermal Expansion, MD 39 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 40 E-6/K ASTM D 696
DTUL @ 66 psi 206 °C ASTM D 648
DTUL @ 264 psi 196 °C ASTM D 648
Vicat Temperature 211 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Humidity absorption 0.077 % Sim. to ISO 62
Density 1540 kg/m³ ISO 1183
Density 1550 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 135 - 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
Melt temperature 360 - 390 °C -
Mold temperature 150 - 190 °C -
Zone 1 350 - 370 °C -
Zone 2 350 - 370 °C -
Zone 3 350 - 380 °C -
Nozzle temperature 350 - 380 °C -
Characteristics
Processing
Injection Molding
Special Characteristics
Heat stabilized or stable to heat, Transparent
Features
Amorphous
Applications
Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.