Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SUMIKON® PM-9750 - PF-(L+MX) - Sumitomo Bakelite North America

Material Data Center offers the following functions for SUMIKON® PM-9750:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sumikon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
Other Standards[S]
Mold Shrinkage, MD 0.0049 mm/mm JIS K 6911
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
Other Standards[S]
Charpy notched impact strength, +23°C 3.1 kJ/m² JIS K 6911
Flexural Modulus 9500 MPa JIS K 6911
Flexural Strength 102 MPa JIS K 6911
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 0.43 mm -
Other Standards[S]
DTUL @ 264 psi 225 °C JIS K 6911
S: These properties are reported by the producer according standards that are different to our defaults.
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 175 - IEC 60112
Other Standards[S]
Dielectric Strength, Step-by-Step 10 kV/mm JIS K 6911
Arc Resistance 180 s JIS K 6911
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Other Standards[S]
Density 1670 kg/m³ JIS K 6911
S: These properties are reported by the producer according standards that are different to our defaults.
Characteristics
Processing
Injection Molding, Transfer Molding
Delivery form
Black
Special Characteristics
Heat stabilized or stable to heat
Certifications
Contains renewable resources
Applications
Electrical and Electronical
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.