Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Extem - PEI, PI - Saudi Basic Industries Corp. (Sabic)

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

A search for "Extem" in Material Data Center leads to the following information:

Tradename: Extem
Family: PEI, PI
Producer: Saudi Basic Industries Corp. (Sabic)
16 hits in the material database


Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.

Datasheet Polymer
EXTEM™ Resin VH1003 - Americas PI
EXTEM™ Resin VH1003 - Asia PI
EXTEM™ Resin VH1003 - Europe PI
EXTEM™ Resin VH1003F - Americas PI
EXTEM™ Resin VH1003F - Asia PI
EXTEM™ Resin VH1003F - Europe PI
EXTEM™ Resin VH1003M - Americas PI
EXTEM™ Resin VH1003M - Asia PI
EXTEM™ Resin VH1003M - Europe PI
EXTEM™ Resin VH1003P - Americas PI
EXTEM™ Resin VH1003P - Asia PI
EXTEM™ Resin VH1003P - Europe PI
EXTEM™ Filament AMHH811F PI
EXTEM™ Resin XH1015UCL PI
EXTEM™ Resin XH2315 PI-GF30
EXTEM™ Resin RH1016UCL PI

Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.

Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.