Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EXTEM™ Resin VH1003F - Europe - PI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for EXTEM™ Resin VH1003F - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Extem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815. Global Food Contact Approvals. Resin is a Dual-use item and is subject to export control restrictions under both U.S. 15 CFR 774 and Annex I of Reg. (EC) 428/2009 as ECCN 1C008. Diversion contrary to law is prohibited.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 8 cm³/10min ISO 1133
Temperature 360 °C -
Load 5 kg -
ASTM Data
Melt Flow Index, MFI 15.5 g/10min ASTM D 1238
Temperature 367 °C -
Load 6.6 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3110 MPa ISO 527
Yield stress 95 MPa ISO 527
Yield strain 8.5 % ISO 527
Stress at break 78 MPa ISO 527
Strain at break 50 % ISO 527
Flexural modulus 3080 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C N kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
Izod notched impact strength, +23°C, 4mm 4 kJ/m² ISO 180/1A
Izod notched impact strength, -30°C, 4mm 5 kJ/m² ISO 180/1A
Ball indentation hardness 140 MPa ISO 2039-1
ASTM Data
Tensile Modulus 3510 MPa ASTM D 638
Tensile Strength at Yield 96 MPa ASTM D 638
Tensile Strength at Break 96 MPa ASTM D 638
Elongation at Yield 6 % ASTM D 638
Elongation at Break 50 % ASTM D 638
Flexural Modulus 3170 MPa ASTM D 790
Izod Impact notched, 1/8 in 69 J/m ASTM D 256
Izod Impact notched, Low-Temperature 74 J/m ASTM D 256
Temperature -30 °C -
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 228 °C ISO 75-1/-2
Vicat softening temperature, B 242 °C ISO 306
Vicat softening temperature, 120°C/h 50N 238 °C ISO 306
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 3.2 mm -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (3) 3 mm -
ASTM Data
DTUL @ 264 psi 217 °C ASTM D 648
Vicat Temperature 242 °C ASTM D 1525
Electrical propertiesValueUnitTest Standard
ISO Data
Dissipation factor, 100Hz 80 E-4 IEC 62631-2-1
Dissipation factor, 1MHz 70 E-4 IEC 62631-2-1
Comparative tracking index 175 - IEC 60112
ASTM Data
Dielectric Strength, Short Time 17 kV/mm ASTM D 149
Other propertiesValueUnitTest Standard
Water absorption 1.75 % Sim. to ISO 62
Humidity absorption 0.6 % Sim. to ISO 62
Density 1300 kg/m³ ISO 1183
Density 1300 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
Melt temperature 380 - 405 °C -
Mold temperature 135 - 165 °C -
Zone 1 360 - 380 °C -
Zone 2 370 - 395 °C -
Zone 3 380 - 405 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Special Characteristics
Transparent
Certifications
Food contact, RoHS compliant
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.