Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 3310TD - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 3310TD:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
ULTEM 3310TD resin is an amorphous, filled, near infra-red transparent polyetherimide (PEI) thermoplastic, offering a material with an unique combination of low CTE and high near infra-red transparency.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 6.84 cm³/10min ISO 1133
温度 337 °C -
载荷 6.7 kg -
ASTM数据
熔融指数, MFI 10.3 g/10min ASTM D 1238
温度 337 °C -
负载 6.7 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 4900 MPa ISO 527
断裂应力 67 MPa ISO 527
断裂伸长率 1.6 % ISO 527
弯曲模量, 23°C 4900 MPa ISO 178
简支梁冲击强度, +23°C 21.1 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 4.1 kJ/m² ISO 179/1eA
Izod冲击强度, +23°C 36.5 kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C 4.7 kJ/m² ISO 180/1A
ASTM数据
拉伸模量 5000 MPa ASTM D 638
断裂拉伸强度 62 MPa ASTM D 638
断裂伸长率 1.5 % ASTM D 638
弯曲模量 5000 MPa ASTM D 790
弯曲强度 109 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 47 J/m ASTM D 256
Izod冲击强度, 1/8 in 580 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 197 °C ISO 75-1/-2
热变形温度, 0.45 MPa 208 °C ISO 75-1/-2
维卡软化温度, B 211 °C ISO 306
ASTM数据
热释放速率, 平行 39 E-6/K ASTM D 696
热释放速率, 垂直 40 E-6/K ASTM D 696
DTUL @ 66 psi 206 °C ASTM D 648
DTUL @ 264 psi 196 °C ASTM D 648
维卡温度 211 °C ASTM D 1525
其它性能价值单位Test Standard
吸湿性 0.077 % 类似ISO 62
密度 1540 kg/m³ ISO 1183
密度 1550 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 135 - 150 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 360 - 390 °C -
模具温度 150 - 190 °C -
1区 350 - 370 °C -
2区 350 - 370 °C -
3区 350 - 380 °C -
喷嘴温度 350 - 380 °C -
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的, 透明.
特征
无定形
应用
电子电气
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.