Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 9075 - Europe - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 9075 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 15 cm³/10min ISO 1133
温度 340 °C -
载荷 5 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 3200 MPa ISO 527
屈服应力 90 MPa ISO 527
屈服伸长率 6 % ISO 527
断裂应力 75 MPa ISO 527
断裂伸长率 25 % ISO 527
弯曲模量 3200 MPa ISO 178
简支梁缺口冲击强度, +23°C 7 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 6 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C, 4mm 7 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm 5 kJ/m² ISO 180/1A
球压硬度 127 MPa ISO 2039-1
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 210 °C ISO 306
维卡软化温度, B 200 °C ISO 306
维卡软化温度, 120°C/h 50N 200 °C ISO 306
热导率 0.26 W/(m K) DIN 52616
灼热丝燃烧指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 测试用试样厚度 3.2 mm -
其它性能价值单位Test Standard
吸水性 1.25 % 类似ISO 62
吸湿性 0.7 % 类似ISO 62
密度 1320 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 135 - 145 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 350 - 370 °C -
模具温度 135 - 165 °C -
加料温度 80 - 120 °C -
1区 340 - 360 °C -
2区 345 - 365 °C -
3区 350 - 370 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑, 异型材挤出成型
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.