Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 9075 - Europe - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 9075 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 15 cm³/10min ISO 1133
Temperatura 340 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3200 MPa ISO 527
Carico unitario a trazione 90 MPa ISO 527
Deformazione a snervamento 6 % ISO 527
Carico unitario a rottura 75 MPa ISO 527
Deformazione a rottura 25 % ISO 527
Modulo a flessione 3200 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 7 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 6 kJ/m² ISO 179/1eA
Resist. urto Izod con intaglio, +23°C, 4mm 7 kJ/m² ISO 180/1A
Resist. urto Izod con intaglio, -30°C, 4mm 5 kJ/m² ISO 180/1A
Ball indentation hardness 127 MPa ISO 2039-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di rammollimento Vicat, A 210 °C ISO 306
Temp.di rammollimento Vicat, B 200 °C ISO 306
Temp.di rammollimento Vicat, 120°C/h 50N 200 °C ISO 306
Conduttività termica 0.26 W/(m K) DIN 52616
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 3.2 mm -
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 1.25 % Sim. alla ISO 62
Assorbimento d'umidità 0.7 % Sim. alla ISO 62
Massa volumica 1320 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 135 - 145 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 350 - 370 °C -
Temperatura dello stampo 135 - 165 °C -
Temperatura - Zona di Alimentazione 80 - 120 °C -
Zona 1 340 - 360 °C -
Zona 2 345 - 365 °C -
Zona 3 350 - 370 °C -
Velocità di Rotazione della Vite 40 - 70 rpm -
Contropressione 0.3 - 0.7 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione Profilati
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.