Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of TABOREX TA 1154 HD - (PE-HD) - Silon s.r.o.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Taborex datasheets, application examples or technical articles are available in Material Data Center
This system allows the compound to be extruded as a normal thermoplastic polymer
and will attain a high level of crosslinking in the processed form. The final product provides all the superior properties associated with crosslinked polyethylene.
Crosslinking Cure
The following methods are recommended:
• Autoclave using saturated steam at 100–115 °C (optimal methode)
• By immersion in hot water at 80–95 °C
• Exposure to low pressure steam
The period required to obtain the final gel content depends on the wall thickness and
the temperature. The exposure times are in the range of 4–8 hours.
加工/物理特性 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
熔融指数, MFI | 1.8 | g/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
温度 | 190 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
负载 | 5 | kg | - |
机械性能 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
断裂应力 | 24 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
断裂伸长率 | 490 | % | ISO 527 |
其它性能 | 价值 | 单位 | Test Standard |
密度 | 948 | kg/m³ | ISO 1183 |
Bulk density | 520 | kg/m³ | - |
加工推荐(挤出) | 价值 | 单位 | Test Standard |
1区 | 160 - 170 | °C | - |
2区 | 170 - 180 | °C | - |
3区 | 170 - 190 | °C | - |
4区 | 170 - 190 | °C | - |
喷嘴温度 | 190 - 220 | °C | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.