Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 318BJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 318BJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 光学特性 - 机械性能(薄膜)
Any use of this information falls under the rules of our disclaimer.
材料文字说明
SABIC® LLDPE 318BJ is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BJ exhibit excellent optical properties, puncture resistance and tear strength .SABIC® LLDPE 318BJ is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 2.8 g/10min ASTM D 1238
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
肖氏硬度D 48 - ISO 7619-1
ASTM数据
屈服应力 12 MPa ASTM D 638
断裂拉伸强度 13 MPa ASTM D 638
屈服伸长率 16 % ASTM D 638
断裂伸长率 710 % ASTM D 638
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 102 °C ISO 306
ASTM数据
维卡温度 98 °C ASTM D 1525
电性能价值单位Test Standard
ASTM数据
耗散因素, 60 Hz 0.0005 - ASTM D 150
电介质常数, 60 Hz 2.2 - ASTM D 150
体积电阻率 >1E15 Ohm*cm ASTM D 257
光学特性价值单位Test Standard
ASTM数据
光泽度 90 - ASTM D 2457
雾度 5 % ASTM D 1003
机械性能(薄膜)价值单位Test Standard
ISO数据
继续撕裂强度, 垂直 140 N/mm ISO 6383-1
ASTM Data
拉伸模量, 平行 28 MPa ASTM D 882
拉伸模量, 垂直 600 MPa ASTM D 882
屈服应力, 平行 13 MPa ASTM D 882
屈服应力, 垂直 10 MPa ASTM D 882
断裂拉伸强度, 平行 28 MPa ASTM D 882
断裂拉伸强度, 垂直 18 MPa ASTM D 882
断裂伸长率, 平行 470 % ASTM D 882
断裂伸长率, 垂直 600 % ASTM D 882
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.