Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 318BJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 318BJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades eléctricas - Propiedades opticas - Propiedades mecánicas (Film)
Any use of this information falls under the rules of our disclaimer.
Texto del producto
SABIC® LLDPE 318BJ is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BJ exhibit excellent optical properties, puncture resistance and tear strength .SABIC® LLDPE 318BJ is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 2.8 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Dureza Shore D 48 - ISO 7619-1
ASTM Data
Esfuerzo de fluencia a tracción 12 MPa ASTM D 638
Esfuerzo de fractura a tracción 13 MPa ASTM D 638
Alargamiento a la fluencia 16 % ASTM D 638
Alargamiento a la rotura 710 % ASTM D 638
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temp. reblandecimiento Vicat, A 102 °C ISO 306
ASTM Data
Temperatura Vicat 98 °C ASTM D 1525
Propiedades eléctricasValorUnidadesMétodo de ensayo
ASTM Data
Factor de pérdidas dieléctricas, 60 Hz 0.0005 - ASTM D 150
Constante dieléctrica, 60 Hz 2.2 - ASTM D 150
Resistividad volumétrica >1E15 Ohm*cm ASTM D 257
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Brillo 90 - ASTM D 2457
Opacidad 5 % ASTM D 1003
Propiedades mecánicas (Film)ValorUnidadesMétodo de ensayo
ISO Data
Resistencia al desgarro Trouser, normal 140 N/mm ISO 6383-1
ASTM Data
Módulo de tracción, long. 28 MPa ASTM D 882
Módulo de tracción, normal 600 MPa ASTM D 882
Esfuerzo de fluencia a tracción, long. 13 MPa ASTM D 882
Esfuerzo de fluencia a tracción, normal 10 MPa ASTM D 882
Esfuerzo de fractura a tracción, long. 28 MPa ASTM D 882
Esfuerzo de fractura a tracción, normal 18 MPa ASTM D 882
Alargamiento a la rotura, long. 470 % ASTM D 882
Alargamiento a la rotura, normal 600 % ASTM D 882
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.