Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of ALFATER XL A60E 2GP0000 - TPV - MOCOM Compounds GmbH & Co. KG
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Alfater datasheets, application examples or technical articles are available in Material Data Center
材料类型 | PP/EPDM共混硫化热塑性弹性体 |
颜色 | 黑色 |
工作温度 | 最大范围 (取决于负载,几何尺寸等) -40-125 °C |
主要特征 | 高粘度,良好的耐气候性,良好的抗化学性,耐臭氧,耐热空气,耐水解,Bewitterung trocken-heiß (Kalahari),Bewitterung feucht-warm (Florida) |
市场分类 | 汽车,建筑,机械,电子电器,家具 |
应用范围 | 挤出部件,吹塑部件,Coextrusion |
主要应用 | 型材,密封件,密封件,导管,管路,线束导架,线缆护套,波纹管,空气导管,2K-Bauteile |
粘接于 | 均聚聚丙烯,Polypropylen Copolymer,聚乙烯,PP/EPDM共混硫化热塑性弹性体,烯烃类热塑性弹性体,常用热塑性弹性体 |
机械性能 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
撕裂强度 | 22 | kN/m | ISO 34-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
肖氏硬度A | 60 | - | ISO 7619-1 |
热性能 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.5mm名义厚度时的燃烧性 | HB | class | IEC 60695-11-10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
测试用试样的厚度 | 1.5 | mm | - |
电性能 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
相对漏电起痕指数 | 600 | - | IEC 60112 |
其它性能 | 价值 | 单位 | Test Standard |
密度 | 940 | kg/m³ | ISO 1183 |
烘干条件 | 在干燥空气(除湿)干燥器里 70-80 °C for 2-4 h 不必要的 <0,10 % |
挤出成型工艺 | 注塑熔体温度 190-230 °C 模头温度 190-210 °C |
储存 | 干燥,避免光照 不高于30°C fest verschlossen |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.