Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of ALFATER XL A60E 2GP0000 - TPV - MOCOM Compounds GmbH & Co. KG
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Alfater datasheets, application examples or technical articles are available in Material Data Center
Base Polymer | Thermoplastic Vulcanisate (PP+EPDM) |
Colour | black |
Service Temperature | max. range (depending on load, geometry, etc.) -40-125 °C |
Special Features | high viscosity,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant,black fulfills weathering dry, hot (Kalahari, PV3929),black fulfills weathering moist, hot (Florida, PV3930) |
Market Segment | Automotive,building and construction,Machinery,electrical and electronic,Furniture |
Application Area | extruded parts,blow moulded parts,coextrusion |
Typical Applications | profile,seals,sealing lip,conduit,tubes,cable guides,cable jacketing,bellows,air duct,2K components |
Adhesion to | Polypropylene Homopolymer,Polypropylene Copolymer,Polyethylene,Thermoplastic Vulcanisate (PP+EPDM),Thermoplastic Olefin Elastomer,Thermoplastic Elastomer general |
Propriedades mecânicas | Valor | Unidade | Método de ensaio | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Dados | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Resistência ao rasgamento | 22 | kN/m | ISO 34-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dureza Shore A | 60 | - | ISO 7619-1 |
Propriedades térmicas | Valor | Unidade | Método de ensaio | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Dados | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flamabilidade a 1.5mm esp. nom. | HB | class | IEC 60695-11-10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Espessuras do tubo de teste | 1.5 | mm | - |
Propriedades elétricas | Valor | Unidade | Método de ensaio | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Dados | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Índice comparativo de linha de fuga | 600 | - | IEC 60112 |
Outras propriedades | Valor | Unidade | Método de ensaio |
Densidade | 940 | kg/m³ | ISO 1183 |
Pre-Drying Conditions | in a dry air (dessiccant) dryer 70-80 °C for 2-4 h max. moisture content <0,10 % |
Processing Extrusion | melt temperature 190-230 °C die temperature 190-210 °C |
Storage | dry, protected from light not above 30°C tightly sealed |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.