Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9112 BK - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9112 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Conductive, heat-stabilized and light-resistant polyamide 12 compound for the extrusion coating of steel tubing

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound, especially developed for the pore-free extrusion coating of steel tubing.
 
Compared to commonly use conductive extrusion compounds VESTAMID® LX9112 BK is distinguished by a significant lower melt viscosity and respectively by outstanding extrusion characteristics even in very thin coatings.
 
Steel tubing coated with VESTAMID® LX9112 BK meet the requirements of the US automotive industry to prevent electrostatic charge caused by flowing liquid fuels.

Due to the excellent impact strength and the  good abrasion and chemical resistance of polyamide 12 the seamless coating with VESTAMID® LX9112 BK improves the corrosion resistance of steel tubing significantly.
 
VESTAMID® LX9112 BK is supplied as cylindrical pellets, ready for processing in moisture-proof packaging.


Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 34 / * cm³/10min ISO 1133
温度 240 / * °C -
载荷 10 / * kg -
模塑收缩率, 平行 1.2 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.5 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 2120 / 1690 MPa ISO 527
屈服应力 54 / 48 MPa ISO 527
屈服伸长率 4 / 13 % ISO 527
名义断裂伸长率 32 / >50 % ISO 527
无缺口简支梁冲击强度, +23°C N / N kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C N / N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 4 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
简支梁缺口冲击强度, -30°C 3 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 176 / * °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 44 / * °C ISO 11357-1/-2
热变形温度, 1.80 MPa 52 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 150 / * °C ISO 75-1/-2
维卡软化温度, B 156 / * °C ISO 306
线性热膨胀系数, 平行 105 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 124 / * E-6/K ISO 11359-1/-2
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 43000 / 29000 Ohm*m IEC 62631-3-1
其它性能干 / 已调节单位Test Standard
吸水性 1.11 / * % 类似ISO 62
吸湿性 0.65 / * % 类似ISO 62
密度 1120 / - kg/m³ ISO 1183
典型数据
加工方法
其它挤出成型, 表面涂层
供货形式
粒料, 黑色
特殊性能
提高导电性, 防静电的, 高冲击韧性的/经抗冲改性的, 经光稳处理的/耐光的, 经热稳处理的/耐热的
耐化学试剂
通用耐化学性
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.