Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® LUX B 4300 G4 - PBT-GF20 - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

具有30 %玻璃纤维的易流动注塑等级， 用于坚硬、 有韧
性、 尺寸稳定的技术零部件 （例如风档刮水器臂、 印刷电路板PCB、 外壳、 控制台、 催化剂载体、 盖）。

GF30

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	9	cm³/10min	ISO 1133
温度	260	°C	-
载荷	5	kg	-
模塑收缩率, 平行	0.8	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.2	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	7300	MPa	ISO 527
断裂应力	125	MPa	ISO 527
断裂伸长率	3.5	%	ISO 527
无缺口简支梁冲击强度, +23°C	40	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	35	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	6.5	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	6.3	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	220	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	200	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	220	°C	ISO 75-1/-2
线性热膨胀系数, 平行	35	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	125	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.5	mm	-
Yellow Card 现存	是的	-	-
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	0.8	mm	-
Yellow Card 现存	是的	-	-

电性能	价值	单位	Test Standard
ISO数据
体积电阻率	>1E13	Ohm*m	IEC 62631-3-1
表面电阻率	1E15	Ohm	IEC 62631-3-2
相对漏电起痕指数	300	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	0.4	%	类似ISO 62
吸湿性	0.2	%	类似ISO 62
密度	1460	kg/m³	ISO 1183

模塑测量的特殊性能	价值	单位	Test Standard
ISO数据
粘数	100	cm³/g	ISO 307, 1157, 1628

函数

典型数据

加工方法

注塑

供货形式

粒料

添加剂

润滑剂

特殊性能

经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的

特征

可激光焊接的

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 270 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 60 - 100 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 5 min

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.