Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 6550 FC / PBT 6550 - PBT - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

The BASF Ultradur® FC (Food Contact) grades enable the industry to develop products for food contact applications which are in compliance with multiple regional food contact regulations including FDA, European Food Contact (EU) Nr. 10/2011 and GMP (EC) N°2023/2006.

Additional food contact compliances may also be available. Please contact your local representative or plastics safety (E-Mail: plastics.safety@basf.com).

Abbreviated designation according to ISO 1043-1: PBT
CLASSIFICATION ACCORDING TO ISO 7792-1:
Moulding Compound ISO 7792-PBT, EGHLN, 15-020

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	9	cm³/10min	ISO 1133
温度	250	°C	-
载荷	2.16	kg	-
模塑收缩率, 平行	1.7	%	ISO 294-4, 2577
模塑收缩率, 垂直	2.1	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2400	MPa	ISO 527
屈服应力	54	MPa	ISO 527
屈服伸长率	3.5	%	ISO 527
名义断裂伸长率	>50	%	ISO 527
拉伸蠕变模量, 1h	1800	MPa	ISO 899-1
拉伸蠕变模量, 1000h	1100	MPa	ISO 899-1
无缺口简支梁冲击强度, +23°C	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	6	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	223	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	55	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	135	°C	ISO 75-1/-2
线性热膨胀系数, 平行	110	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	110	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.5	mm	-
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	0.8	mm	-

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	3.3	-	IEC 62631-2-1
相对介电常数., 1MHz	3.3	-	IEC 62631-2-1
介质损耗因子, 100Hz	10	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	200	E-4	IEC 62631-2-1
体积电阻率	>1E13	Ohm*m	IEC 62631-3-1
表面电阻率	1E13	Ohm	IEC 62631-3-2
相对漏电起痕指数	600	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	0.5	%	类似ISO 62
吸湿性	0.25	%	类似ISO 62
密度	1300	kg/m³	ISO 1183

模塑测量的特殊性能	价值	单位	Test Standard
ISO数据
粘数	160	cm³/g	ISO 307, 1157, 1628

函数

典型数据

加工方法

注塑, 薄膜挤出成型, 异型材挤出成型, 片材挤出成型, 其它挤出成型

供货形式

粒料

Certifications

可食品接触的, 10/2011认证, FDA 21 CFR认证

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 275 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 40 - 80 °C
injection molding, Mold temperature, recommended: 60 °C
injection molding, Dwell time, thermoplastics: 10 min

其E烦龀尚

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
Extrusion, Prepreg, Melt temperature: 230 - 250 °C
Extrusion, Pipes, Melt temperature: 230 - 260 °C
Extrusion, cable sheathing, Melt temperature: 230 - 260 °C

E尾募烦龀尚

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
Extrusion, Profiles, Melt temperature: 230 - 260 °C

板材挤出成型

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 275 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 40 - 80 °C
injection molding, Mold temperature, recommended: 60 °C
injection molding, Dwell time, thermoplastics: 10 min

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	乳酸 (10g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氨水(氢氧化铵) (10g/100g) (23°C)
醇类
	异丙醇 (23°C)
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
	异辛烷 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
	SAE 10W40号多效润滑油 (130°C)
标准燃油
	柴油(优先使用F类ISO 1817液体) (23°C)
盐溶液
	碳酸钠溶液 (2g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	水 (23°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.