Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin DU242 - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin DU242:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 函数
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Enhanced low temperature impact, high flow Polyetherimide blend.  ECO Conforming.
UL Yellow Card E121562-647600
加工/物理特性价值单位Test Standard
ISO数据
熔体密度 1070 kg/m³ -
熔体 0.23 W/(m K) -
熔体的比热 1880 J/(kg K) -
喷射温度 156 °C -
ASTM数据
熔融指数, MFI 30 g/10min ASTM D 1238
温度 337 °C -
负载 6.6 kg -
模压收缩率, 平行 0.006 mm/mm ASTM D 955
模压收缩率, TD 0.006 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
拉伸模量 2580 MPa ISO 527
ASTM数据
拉伸模量 2580 MPa ASTM D 638
屈服应力 74 MPa ASTM D 638
断裂伸长率 67 % ASTM D 638
弯曲模量 2510 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 181 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 1.0 mm -
Yellow Card 现存 是的 - -
ASTM数据
DTUL @ 264 psi 160 °C ASTM D 648
其它性能价值单位Test Standard
密度 1220 kg/m³ ISO 1183
密度 1240 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 135 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 330 - 355 °C -
模具温度 95 - 135 °C -
1区 310 - 330 °C -
2区 320 - 345 °C -
3区 330 - 355 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
函数
粘度－剪切速度 , ULTEM™ Resin DU242, PEI, SABIC
剪切应力－剪切速度 , ULTEM™ Resin DU242, PEI, SABIC
比容－温度(pvT) , ULTEM™ Resin DU242, PEI, SABIC
典型数据
加工方法
注塑
特殊性能
阻燃的, 可电镀的, 高冲击韧性的/经抗冲改性的, 经热稳处理的/耐热的
特征
无定形, 防蠕变, 低烟量
耐化学试剂
通用耐化学性, 水解稳定
应用
汽车, 建材, 电子电气, 包装
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.