Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin AUR200G6 - Europe - PEI-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin AUR200G6 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
AUR200G6 is a 30% glass fiber filled ULTEM Utility grade. The grade will have a limited color availability, dark gray to black. The data listed in this data sheet are the lower specification limits, apart from the MFR, CTE, HDT at 1.8 MPa, Density, Tensile strain, Water Absorption, Thermal Conductivity and Shrinkage which are typical data. The MVR of this material at 337 degrees C/6.7 kgf will have a specification between 3 and 7.5 (MFR: 4.2-10.5)

UL Yellow Card Link E121562-101772829
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 7.5 g/10min ASTM D 1238
温度 337 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 8000 MPa ISO 527
断裂应力 120 MPa ISO 527
断裂伸长率 3 % ISO 527
弯曲模量 6500 MPa ISO 178
悬臂梁缺口冲击强度, +23°C, 4mm 4 kJ/m² ISO 180/1A
热性能价值单位Test Standard
ISO数据
1.5mm名义厚度时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 1.5 mm -
热导率 0.3 W/(m K) DIN 52616
其它性能价值单位Test Standard
吸水性 0.9 % 类似ISO 62
吸湿性 0.5 % 类似ISO 62
密度 1530 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 150 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 370 - 410 °C -
模具温度 140 - 180 °C -
加料温度 80 - 120 °C -
1区 350 - 400 °C -
2区 360 - 410 °C -
3区 370 - 420 °C -
典型数据
加工方法
注塑
应用
汽车
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.