Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 2210 - Americas - PEI-GF20 - Saudi Basic Industries Corporation (SABIC)

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.

UL Yellow Card Link E121562-502535

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体	0.23	W/(m K)	-
熔体的比热	1900	J/(kg K)	-
喷射温度	198	°C	-
ASTM数据
熔融指数, MFI	8.4	g/10min	ASTM D 1238
温度	337	°C	-
负载	6.6	kg	-

机械性能	价值	单位	Test Standard
ASTM数据
拉伸模量	6890	MPa	ASTM D 638
断裂拉伸强度	139	MPa	ASTM D 638
断裂伸长率	4	%	ASTM D 638
洛克硬度	M 114	-	ASTM D 785
悬臂梁缺口冲击强度, 1/8 in	64	J/m	ASTM D 256
Izod冲击强度, 1/8 in	475	J/m	ASTM D 256

热性能	价值	单位	Test Standard
ISO数据
线性热膨胀系数, 平行	21.9	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	46	E-6/K	ISO 11359-1/-2
厚度为h时的燃烧性	V-0	class	IEC 60695-11-10
测试用试样的厚度	0.4	mm	-
厚度为h时的5V燃烧性	5VA	class	IEC 60695-11-20
测试用试样的厚度	1.9	mm	-
ASTM数据
维卡温度	225	°C	ASTM D 1525

其它性能	价值	单位	Test Standard
密度	1420	kg/m³	ASTM D 792

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	150	°C	-
预干燥-时间	4 - 6	h	-
加工湿度	≤0.02	%	-
注塑熔体温度	350 - 400	°C	-
模具温度	135 - 165	°C	-
1区	330 - 400	°C	-
2区	340 - 400	°C	-
3区	345 - 400	°C	-
螺杆转速	40 - 70	rpm	-
背压	0.3 - 0.7	MPa	-

函数

典型数据

加工方法

注塑

应用

汽车

地区供应

北美

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.