View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ThermaX™ PEKK - PEKK - 3DXTECH

Material Data Center offers the following functions for ThermaX™ PEKK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other ThermaX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

热性能 - 其它性能 - 3D Data

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Printed Spesimen Conditions

Printer: Open Source FDM/FFF

Nozzle: 0,4 mm

Layer Height: 0,25 mm

Infill: 100%, +/- 45°

Extrusion Temp: 365-380°C

Bed Temp: 120-140°C

Specimen Orientation: XY Flat

热性能

价值

单位

Test Standard

ISO数据

玻璃化转变温度, 10°C/min

165

°C

ISO 11357-1/-2

热变形温度, 0.45 MPa

182

°C

ISO 75-1/-2

1.5mm名义厚度时的燃烧性

V-0

class

IEC 60695-11-10

测试用试样的厚度

1.5

其它性能	价值	单位	Test Standard
密度	1290	kg/m³	ISO 1183

3D Data	价值	单位	Test Standard
拉伸模量, flat	3200^[1]	MPa	-
拉伸强度, flat	105^[1]	MPa	-
弯曲模量, flat	2900^[1]	MPa	-
弯曲强度, flat	134^[1]	MPa	-

45°-45°

典型数据

加工方法

Additive Manufacturing

供货形式

单纤纺丝

地区供应

北美, 中南美洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.