Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Butyrate 264A3720013 - CAB - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Butyrate 264A3720013:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers, or smoke transparents and black translucent.

Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Butyrate 264-13 has a plasticizer level of 13%.




加工/物理特性价值单位Test Standard
ASTM数据
模压收缩率, 平行 0.004 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
屈服应力 29 MPa ASTM D 638
断裂拉伸强度 39.3 MPa ASTM D 638
断裂伸长率 50 % ASTM D 638
弯曲模量 1241 MPa ASTM D 790
洛克硬度 R 59 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 283 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 101 J/m ASTM D 256
温度 -40 °C -
热性能价值单位Test Standard
ASTM数据
热释放速率, 平行 140 E-6/K ASTM D 696
DTUL @ 66 psi 81 °C ASTM D 648
DTUL @ 264 psi 69 °C ASTM D 648
维卡温度 100 °C ASTM D 1525
热导率, 固态 0.036 W/(m K) ASTM C 177
电性能价值单位Test Standard
ASTM数据
电介质强度, 短时 15.3 kV/mm ASTM D 149
耗散因素, 1 MHz 0.08 - ASTM D 150
电介质常数, 1 MHz 3.55 - ASTM D 150
体积电阻率 1E15 Ohm*cm ASTM D 257
光学特性价值单位Test Standard
ASTM数据
雾度 8.5 % ASTM D 1003
折射率 1.48 - ASTM D 542
其它性能价值单位Test Standard
吸水率, 24小时 1.4 % ASTM D 570
密度 1180 kg/m³ ASTM D 792
典型数据
添加剂
增塑剂
特殊性能
透明.
特征
High Gloss
Certifications
生物相容
应用
运动器械
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.