Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TENAC™-C 3510 - POM - Asahi Kasei

Check here, which other Tenac datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	2.4	cm³/10min	ISO 1133
温度	190	°C	-
载荷	2.16	kg	-
熔融指数, MFI	2.8	g/10min	ISO 1133

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2500	MPa	ISO 527
屈服应力	62	MPa	ISO 527
断裂伸长率	40	%	ISO 527
弯曲模量, 23°C	2400	MPa	ISO 178
简支梁缺口冲击强度, +23°C	9	kJ/m²	ISO 179/1eA
ASTM数据
拉伸强度	62	MPa	ASTM D 638
断裂伸长率	40	%	ASTM D 638
弯曲模量	2450	MPa	ASTM D 790
弯曲强度	88	MPa	ASTM D 790
洛克硬度	M 78	-	ASTM D 785
Taber耐磨损性	14	mg/1000 cycles	ASTM D 1044
悬臂梁缺口冲击强度, 1/8 in	96	J/m	ASTM D 256

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	95	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	156	°C	ISO 75-1/-2
线性热膨胀系数, 平行	100	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.5	mm	-
Yellow Card 现存	是的	-	-
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	0.8	mm	-
Yellow Card 现存	是的	-	-
ASTM数据
UL94 燃烧性	HB	-	UL 94
热释放速率, 平行	100	E-6/K	ASTM D 696
DTUL @ 66 psi	158	°C	ASTM D 648
DTUL @ 264 psi	110	°C	ASTM D 648

电性能	价值	单位	Test Standard
ASTM数据
电介质强度, 短时	19	kV/mm	ASTM D 149
表面电阻率	1E17	Ohm	ASTM D 257
体积电阻率	1E16	Ohm*cm	ASTM D 257
耐电弧性	250	s	ASTM D 495

其它性能	价值	单位	Test Standard
密度	1410	kg/m³	ISO 1183
吸水率, 24小时	0.2	%	ASTM D 570
密度	1410	kg/m³	ASTM D 792

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	80 - 90	°C	-
预干燥-时间	3 - 4	h	-
注塑熔体温度	60	°C	-

函数

典型数据

加工方法

注塑, 其它挤出成型

供货形式

粒料

特殊性能

高冲击韧性的/经抗冲改性的

特征

共聚物

应用

汽车

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.