Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SILTEM™ Resin STM1600 - Europe - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SILTEM™ Resin STM1600 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Siltem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
SILTEM™ STM1600 resin is a flexible polyetherimide(PEI)-siloxane copolymer designed for wire and cable applications. It offers a halogen free (according VDE 0472) flame retardant solution that also offers low smoke emission and toxicity. It is an amber colored transparent material that can be selfcolored and easily processed on conventional equipment. The material may also have a fit in flexible profiles or injection molded parts.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 8.6 g/10min ASTM D 1238
温度 295 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1380 MPa ISO 527
屈服应力 42 MPa ISO 527
屈服伸长率 10 % ISO 527
断裂应力 41 MPa ISO 527
断裂伸长率 50 % ISO 527
弯曲模量 1250 MPa ISO 178
悬臂梁缺口冲击强度, +23°C, 4mm 36 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm 25 kJ/m² ISO 180/1A
ASTM数据
邵氏硬度D 72 - ASTM D 2240
Taber耐磨损性 50 mg/1000 cycles ASTM D 1044
热性能价值单位Test Standard
ISO数据
热变形温度, 0.45 MPa 144 °C ISO 75-1/-2
维卡软化温度, 120°C/h 50N 167 °C ISO 306
电性能价值单位Test Standard
ASTM数据
电介质强度, 短时 16.6 kV/mm ASTM D 149
耗散因素, 1 MHz 0.0055 - ASTM D 150
电介质常数, 1 MHz 3.02 - ASTM D 150
表面电阻率 1E15 Ohm ASTM D 257
体积电阻率 >1E15 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
吸水性 0.58 % 类似ISO 62
密度 1190 kg/m³ ISO 1183
密度 1190 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 105 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 310 - 320 °C -
模具温度 105 - 115 °C -
1区 310 - 320 °C -
2区 310 - 320 °C -
3区 310 - 320 °C -
螺杆转速 50 - 100 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
添加剂
阻燃剂
特殊性能
阻燃的, 透明.
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.