Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound 15T1040 - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound 15T1040:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
SABIC® PPcompound 15T1040 is a 40% talc-filled polypropylene homopolymer. The materials high fill grade makes for a very high stiffness. This combined with the good thermal stabilization makes it especially suited for applications requiring a very high modulus and high thermal stability. SABIC® PPcompound 15T1040 is a designated automotive grade. IMDS ID: 1648799
机械性能价值单位Test Standard
ISO数据
拉伸模量 5520 MPa ISO 527
屈服应力 36 MPa ISO 527
屈服伸长率 2.1 % ISO 527
断裂应力 26 MPa ISO 527
断裂伸长率 17 % ISO 527
弯曲模量, 23°C 3500 MPa ISO 178
简支梁缺口冲击强度, +23°C 2 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 1 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度 1.4 kJ/m² ISO 180/1A
ASTM数据
拉伸模量 4240 MPa ASTM D 638
屈服应力 33 MPa ASTM D 638
断裂拉伸强度 28 MPa ASTM D 638
屈服伸长率 2.9 % ASTM D 638
断裂伸长率 8.4 % ASTM D 638
弯曲模量 3750 MPa ASTM D 790
邵氏硬度D 75 - ASTM D 2240
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 88 °C ISO 75-1/-2
热变形温度, 0.45 MPa 130 °C ISO 75-1/-2
维卡软化温度, A 158 °C ISO 306
ASTM数据
DTUL @ 66 psi 137 °C ASTM D 648
DTUL @ 264 psi 82 °C ASTM D 648
其它性能价值单位Test Standard
密度 1250 kg/m³ ISO 1183
密度 1260 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 - 100 °C -
预干燥-时间 2 - 4 h -
注塑熔体温度 210 - 270 °C -
模具温度 15 - 60 °C -
1区 190 - 230 °C -
2区 200 - 250 °C -
3区 210 - 270 °C -
喷嘴温度 210 - 270 °C -
背压 1 - 1.5 MPa -
典型数据
特征
均聚物
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.