Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE CC254 - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE CC254:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
SABIC HDPE CC254 is state of the art resin prodckuced by ACP technology. It is easy to process on injection molding and compression molding machines. The grade offers good balance of stiffness, toughness and environmental stress cracking resistance properties.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 6.3 g/10min ISO 1133
温度 190 °C -
负载 5 kg -
机械性能价值单位Test Standard
ISO数据
屈服伸长率 10 % ISO 527
简支梁冲击强度, -30°C 5 kJ/m² ISO 179/1eU
ASTM数据
拉伸模量 1150 MPa ASTM D 638
屈服应力 30 MPa ASTM D 638
邵氏硬度D 62 - ASTM D 2240
热性能价值单位Test Standard
ISO数据
维卡软化温度, B 75 °C ISO 306
典型数据
加工方法
注塑
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.