Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pellethane® 2363-80AE TPU - TPU - The Lubrizol Corporation

Material Data Center offers the following functions for Pellethane® 2363-80AE TPU:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pellethane datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 10 g/10min ASTM D 1238
温度 190 °C -
负载 8.7 kg -
模压收缩率, 平行 0.0055 mm/mm ASTM D 955
模压收缩率, TD 0.0015 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
100%伸长率时的模量 6.1 MPa ASTM D 412
300%伸长率时的模量 10.3 MPa ASTM D 412
邵氏硬度A 85 - ASTM D 2240
撕裂强度 73.6 kN/m ASTM D 624
Taber耐磨损性 30 mg/1000 cycles ASTM D 1044
压缩形变, 22小时 @ 73 °F 30 % ASTM D 395
压缩形变, 22 hr @ 158 °F 80 % ASTM D 395
热性能价值单位Test Standard
ASTM数据
热释放速率, 平行 165 E-6/K ASTM D 696
玻璃化转变温度 -47 °C ASTM E 1356
维卡温度 81.7 °C ASTM D 1525
其它性能价值单位Test Standard
密度 1120 kg/m³ ASTM D 792
典型数据
特征
少气味
Certifications
US药物六级认证
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.