Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Moplen RP344N - PP - PolyMirae

Material Data Center offers the following functions for Moplen RP344N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Moplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 13 g/10min ISO 1133
温度 230 °C -
ASTM数据
熔融指数, MFI 13 g/10min ASTM D 1238
温度 230 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
屈服应力 26 MPa ISO 527
屈服伸长率 13 % ISO 527
弯曲模量, 23°C 1100 MPa ISO 178
简支梁冲击强度, +23°C 220 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 5 kJ/m² ISO 179/1eA
ASTM数据
屈服应力 29.4 MPa ASTM D 638
屈服伸长率 13 % ASTM D 638
弯曲模量 1177 MPa ASTM D 790
洛克硬度 R 90 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 47.1 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 19.2 J/m ASTM D 256
温度 -20 °C -
热性能价值单位Test Standard
ISO数据
热变形温度, 0.45 MPa 74 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 90 °C ASTM D 648
其它性能价值单位Test Standard
密度 900 kg/m³ ISO 1183
密度 900 kg/m³ ASTM D 792
典型数据
加工方法
注塑
特殊性能
透明.
特征
颜色稳定性, 少气味, 随机共聚物
Certifications
可食品接触的, FDA 21 CFR认证
地区供应
亚太, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.