Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® FR7087 - PC - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® FR7087:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 试样制备条件
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 12 cm³/10min ISO 1133
温度 300 °C -
载荷 1.2 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2500 MPa ISO 527
屈服应力 75 MPa ISO 527
屈服伸长率 5 % ISO 527
无缺口简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 106 °C ISO 75-1/-2
热变形温度, 0.45 MPa 118 °C ISO 75-1/-2
维卡软化温度, B 123 °C ISO 306
1.5mm名义厚度时的燃烧性 V-2 class IEC 60695-11-10
测试用试样的厚度 1.5 mm -
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 2.2 mm -
厚度为h时的5V燃烧性 5VA class IEC 60695-11-20
测试用试样的厚度 3.0 mm -
试样制备条件价值单位Test Standard
ISO数据
注塑, 熔体温度 290 °C ISO 294
注塑, 模具温度 80 °C ISO 294
注塑, 注射速度 200 mm/s ISO 294
典型数据
加工方法
注塑
供货形式
粒料
添加剂
脱模助剂
特殊性能
阻燃的, 经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 透明.
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型
PREPROCESSING
Max. Water content: 0.01 - 0.02 %
Drying temperature: 90 °C
Drying time:
Circulating air drying oven (50 % fresh air) 4-8 h
Fresh air dryer (high speed dryer) 2-4 h
Dry air dryer 2-3 h

PROCESSING
Melt temperature: 280-320 °C
Mold temperature: 80-120 °C

Use open nozzle.
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.